Consistent - An Innovative Journey of Life SSD What is SSD? (Solid State Drive), you should get one.


A solid-state drive, or SSD, is a type of computer storage device. This non-volatile storage medium uses solid-state flash memory to store persistent data. Traditional hard disc drives (HDDs) are being replaced in computers by SSDs, which perform the same basic operations as a hard drive. SSDs, on the other hand, are substantially faster. The device’s operating system will boot up faster with an SSD, prog

A typical hard drive is made up of a spinning disc and a read/write head mounted on a mechanical arm known as an actuator. A hard disc drive (HDD) uses magnetic technology to read and write data. The magnetic characteristics, on the other hand, can cause mechanical failures.

What are solid-state drives used for?

SSD adoption began in high-performance technical fields and in enthusiast PCs, where the drives’ extraordinarily fast access times and throughput justified the increased price. However, with lower-cost mainstream laptops and PCs, they have subsequently become an accepted alternative, if not the default choice.

SSDs have specific benefits in the following areas:

  • Business: SSDs are frequently used by companies that operate with large volumes of data (such as programming environments or data analysis), as access times and file transfer rates are crucial.
  • Gaming: Gaming computers have always pushed the boundaries of current computing technology, necessitating the purchase of very expensive hardware for the sake of gaming performance. This is especially true in terms of storage, 
  • because modern blockbuster games are continually loading and writing files (e.g. textures, maps, levels, characters).
  • Mobility: SSDs have minimal power consumption, allowing laptops and tablets to enjoy longer battery life. SSDs are also shock-resistant, which means data loss is less likely when mobile devices are dropped.
  • Servers: In order to adequately service its client PCs, enterprise servers require SSDs for fast readings and writes.

What are the different types of SSDs?

When shopping for an SSD, you’ll come across words like mSATA and PCIe. So, what exactly does it all imply? Here’s a quick rundown of what you’ll need to know.

To connect an SSD to your computer, you’ll need to use a special interface. The following are examples of common interfaces:

  • PCIe and NVMe SSDs: Graphics cards, network cards, and other high-performance peripherals are typically connected via PCI Express (PCIe). This interface has a high bandwidth and low latency, making it suitable for communicating between the SSD and the CPU/RAM at breakneck speeds.SSDs with this connection type employ the Nonvolatile Memory Express standard (NVMe), which has a greater input-output per second (IOPS) and lower latency than SATA (which we’ll discuss later). NVMe offers raw throughput of up to 16 GB bits per second, which may be scaled up to 4,000 MB per second thanks to numerous parallel channels.


  • mSATA III, SATA III, and traditional SSDs: Serial Advanced Technology Attachment (SATA) is an older interface that was built particularly for storage and can transfer data at speeds of up to 6 GBit/s (600 MB/s). SATA is gradually being phased out in favor of NVME, which is much quicker. Upgrading to a SATA-based SSD might be beneficial for older PCs or laptops with a hard disc drive.

In the consumer market, SSDs come in a variety of storage capacities, starting at roughly 32 GB and going up to 5 TB. (Of course, enterprise-grade storage has substantially more capacity and therefore costs more.)

During the brief age of netbooks (do you remember them? ), The popular Asus Eee PC series, which were inexpensive but slow and flimsy), utilized 1-4 GB of SSDs as storage, from which sections of the operating system were run for faster access. This was the first time SSDs were used in a commercial setting. During the brief age of netbooks (do you remember them? ), The popular Asus Eee PC series, which were inexpensive but slow and flimsy), utilized 1-4 GB of SSDs as storage, from which sections of the operating system were run for faster access. This was the first time SSDs were used in a commercial setting.

Get the best performance from your SSD

The hard disc is by far the slowest portion of any computer system, regardless of how much money you spend. Even a 600 MB SATA SSD is slow when compared to other hardware components that can transport 20-30 Gigabytes per second.

As a result, upgrading to a faster NVMe SSD is likely the greatest investment for a new computer and a wonderful way to speed up your PC or Mac.

We upgraded a 6-year-old gaming PC by replacing its HDD with a SATA SSD and ran a number of tests to demonstrate the speed difference. The results are incredible:

Boot time

Before: 79 seconds

After: 17 seconds

Gaming loading time (GTA V)

Before: 133 seconds

After: 25 seconds

Even SSDs, however, require routine maintenance. You might as well make the most out of your stuff if you have it!

The first performance tip we have is to never use a standard defragmentation programme on an SSD; it isn’t necessary and may even be damaging.

The second suggestion we have is to use TRIM to guarantee that your SSD operates quickly. TRIM is a command that tells your SSD which data blocks can be wiped after they’ve been used, allowing it to operate better and last longer. TRIM may be done quickly and easily with Avast Cleanup’s Defrag application, which you can test for free.

What are the advantages of SSDs?

The benefits of SSDs over HDDs include:

  • Faster read/write speeds. Large files may be accessed fast with SSDs.
  • Quicker boot times and better performance. The drive is more responsive and delivers superior load performance because it does not need to spin up like an HDD.
  • Durability. Because SSDs do not have moving parts, they are more shock resistant and can withstand heat better than HDDs.
  • Power consumption. Due to the lack of moving parts, SSDs consume less power than HDDs.
  • Quieter. Because there are no moving or rotating parts in SSDs, they make less noise.
  • Size. HDD sizes are limited, whereas SSDs available in a range of form factors.

What are the disadvantages of SSDs?

Downsides that come with SSDs include:

  • Cost. Traditional HDDs are more expensive than SSDs.
  • Life expectancy. Some SSDs, such as those that use NAND memory-flash chips, have a limit on how many times they can be written, which is typically lower than that of HDDs.
  • Performance. SSDs’ performance degrades with time due to limitations on the number of write cycles.
  • Storage options. SSDs are often sold in smaller sizes due to cost.
  • Data recovery. Because the data on damaged chips may not be recovered, this time-consuming process can be costly.


Products & Services

Experience the Most Innovative Technological Advancement

About US

Consistent Infosystems Private Limited has started their glorious journey in 2011 from the Capital city of India, New Delhi by visionary Mr. Nitin Bansal and Mr. Yogesh Aggarwal. Since the venture started Consistent Infosystems Private Limited has become one of the fastest growing organizations in the era of technology and already puts it’s remarkable footprints in the Information Technology, Electronics & Home Entertainment industry.


External Hard Disk

LED Monitors


Flash Drive

All In One






E-Waste Management (EPR)

Become A Trade Partner

Warranty Policy

Work With Us

Contact Us





Contact Us



1800-1034-593 (Toll-Free)

Get Updates

Because of the coronavirus (Covid-19) outbreak, our in-person services are closed until further notice. You can subscribe to our newsletter below to get regular updates on our availability.